Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''

Product 1

Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''

SKU: HB1024-12
Unit Price$0.22
Quantity Price Each (USD)
1-99 $0.22
100-501 $0.21
500+ $0.20
1000+ Contact Us
 

Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''

SKU: HB1024-12
Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''
Description:
Combination screws provide a secure mounting point in our Customizable Standoffs lineup. They have a hex head that allows them to be installed with an Allen wrench or Hex Bit screw driver. When paired with a nylon or zinc wall anchor, they can be used in nearly any application. Thanks to the easy installation process you can have an exhibit displayed anywhere you would like in no time! If you look below you will notice technical descriptions about this particular stud.

Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''

SKU: HB1024-12
Sku HB1024-12
Material Zinc
Diameter 5/32''
Length 1-1/2''
Washer Not Included
Thread Type Imperial
Thread 10-24 to #6
Screw Size for Installation #6
Installation

The installation process for this line is quite simple.
First, mark on your surface the area for your holes.
Next you will want to drill a hole (according to your anchor type) and then insert your anchor.
Now, take your combination screw and insert that into the anchor.
After that, take your barrel and thread it onto your thread portion of your combination screw.
Now you will want to insert your stud about halfway into your barrel.
Place your material over the stud, then screw on your cap and you are done!
Step back and admire your work!
Anchor for Concrete ANC1
Anchor for Dry Wall ANC5, ANC5Z, ANC5ZS
Installation Hardware ANC1, ANC5, or ANC5Z
Tools Required Bit Driver (400.424)

Zinc Combination Screw 10-24 Threaded, Length: 1 1/2''

SKU: HB1024-12