5/16-18 Threaded Locking Caps Diameter: 1'', Height: 5/16'', Brushed Satin Stainless Steel Grade 304 [Required Material Hole Size: 3/8'']
Quantity | Price Each (USD) |
---|---|
1-99 | $7.03 |
100-501 | $6.68 |
500+ | $6.33 |
1000+ | Contact Us |
5/16-18 Threaded Locking Caps Diameter: 1'', Height: 5/16'', Brushed Satin Stainless Steel Grade 304 [Required Material Hole Size: 3/8'']
SKU: CAP100LSSOur Aluminum Caps are perfect for all your indoor and outdoor applications. The Locking Caps have a small hole to allow you to use an M4 Allen Wrench to tighten it down even further, which both increases the solidity of your installation and decreases the possibility of theft!
The elegant finishes that we carry will give your display a unique look that will make it stand out like no other!
Thanks to the easy installation process you can have an exhibit displayed anywhere you would like in no time!
If you look below you will notice technical descriptions about this particular standoff.
5/16-18 Threaded Locking Caps Diameter: 1'', Height: 5/16'', Brushed Satin Stainless Steel Grade 304 [Required Material Hole Size: 3/8'']
SKU: CAP100LSSSku | CAP100LSS |
Finish | Satin Brushed |
Inside/Outside | Inside Or Outside Use |
Material | Stainless Steel |
Material Grade | 304 |
Diameter | 1'' |
Cap Height | 5/16'' |
Solid/Hollow | Solid |
Head Shape | Flat |
Shape | Cylinder |
Washer | Not Included |
Thread Type | Imperial |
Thickness Material Accepted | Between (0'' and Depends on Stud Length) |
Thread | 5/16-18 |
Maximum Thick. Material | Depends on Stud Length |
Installation |
The installation process for this line is quite simple.<br />First, mark on your surface the area for your holes.<br />Next you will want to drill a hole (according to your anchor type) and then insert your anchor.<br />Now, take your combination screw and insert that into the anchor.<br />After that, take your barrel and thread it onto your thread portion of your combination screw.<br />Now you will want to insert your stud about halfway into your barrel.<br />Place your material over the stud, then screw on your cap and you are done!<br />Step back and admire your work! |
Load Capacity Per Standoff | 18 lbs / 8 Kg |
Installation Hardware | Anchor for concrete or drywall and 5/16-18 Studs, #8 Combination Screws |
Tools Required | Hand Drill, M4 Allen Key |
5/16-18 Threaded Locking Caps Diameter: 1'', Height: 5/16'', Brushed Satin Stainless Steel Grade 304 [Required Material Hole Size: 3/8'']
SKU: CAP100LSS